Sharp 28LS-94EC, Руководство по эксплуатации

Страница: 17 / 27

ENGLISH - 16 -
For Fastext
The subject-heading for the information may have a particu-
lar colour or can be in a form located in a coloured box.
• Press an appropriate RED, GREEN, YELLOW or BLUE
button in order to reach the relevant page quickly.
To exit Teletext
• Press “
TV
” button. The screen will switch to TV mode.
Connecting external equipment
Via the Euro connector
Your TV set has two euro connector sockets. If you wish to
connect external equipment (e.g. video recorder, decoder,
etc.) which have Euro connectors, to your TV, use
the EXT.1
(EXT-1) or EXT.2 (EXT-2) terminals.
If an external device is connected via Euro connector sock-
ets the TV will be switched to AV mode automatically.
RGB mode
If a piece of equipment outputs RGB signals use the EXT-1
Euro connector as this is RGB ready.
S-VHS EXT2 Mode
If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting
S-VHS EXT2 mode and connecting
your equipment to the EXT.2 (S-VHS EXT2) terminal of TV.
See your equipment's booklet to check if your equipment
has such feature.
Via the ANT (aerial) socket
If your equipment does not have an Euroconnector or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
• To store the test signal that comes from the equipment,
see “ Installation Menu ” on page 12 and store it to the
programme number 0. You can watch images from that
equipment to select the programme number which you
stored the test signal.
TV and Video Recoder (VCR)
• Connect the Video Recorder to the ANT (antenna input)
socket of the TV with the aerial cable.
• Connect the Video Recorder to the EXT.1 or EXT.2 termi-
nal with the SCART cable, or connect it to the terminal with
the audio and video cables.
• VCR is detected automatically.
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press
“
EXT
” button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV
mode.
Copy Facility
You can output the video and audio signals which inputs
from
TV, EXT.1 (EXT-1) or SCREEN terminal to the video
recorder connected to the EXT.2 (EXT-2) terminal.
• To select the output source, see “ EXT2 Output ” on page
12 .
Connecting Headphones
Use the stereo headphone socket on the lower right side of
your TV, to connect headphones.