background image

3

28JF-73E

ELECTRICAL SPECIFICATIONS

White Level

Set brightness control to get total picture tube cathode current of 600 

µ

A under no signal condition.

Maximum necessary correction of each picture tube cathode current to get 8550 degrees

 

K+1 MPCD

screen temperature should not exceed 15% of its original value.

X=0.290 ± 0.015         Y=0.300 ± 0.015

                                            WARNING

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.

Specifications are subject to change without prior notice.

Power Input .................... 220V-240 Volts AC 50Hz

Power Consumption

Normal Operation (Method IEC60107) ............ 77W
Stand-by Operation ............................................ 3W

Audio Power Output Rating (MPO) / Impedance

Internal Left Speaker ................................. 10W, 7

Internal Right Speaker .............................. 10W, 7

Speakers

Left / Right ................................................. 13 x 6cm

Convergence (Maximum Misconvergence)

Static (Centre) between any two  colours  ... 0.08 cm
Dynamic after static equals zero

Within 10cm (4”) circle ....................... 0.12cm
10-25cm (4-10” ) circle ...................... 0.20 cm
Everywhere else ................................ 0.28 cm

Focus ................................. High Bi-Potential Electrostatic

Sweep Deflection ................................................ Magnetic

MODEL DESTINATION (Operation Manual languages).

28JF-73E

:     Deutsch, Français, Nederlands.

28JF-73EES

: Español, Português.

Picture Intermediate frequency

L’ ................................................ 33.9MHz
L, B/G, D/K,I .............................. 38.9MHz

Sound  Carrier Trap

L’ ................................................ 40.4MHz
L, D/K ......................................... 32.4MHz
B/G ............................................ 33.4MHz
I .................................................. 32.9MHz

Adjacent Sound Carrier Trap

L’ ................................................ 32.4MHz
L, D/K, B/G ................................ 40.4MHz
I .................................................. 40.9MHz

Adjacent  Picture  Carrier Trap

L’ ................................................ 41.9MHz
L, D/K, ........................................ 30.9MHz
B/G ............................................ 31.9MHz

Aerial Input Impedance

VHF/UHF ................. 75 ohm Unbalanced

Tuning Ranges ..... 45.75MHz thru 855.25 MHz

VHF: IR A - J / S1 - S41 CH (Hiperband)
UHF: I21 - I69 CH
CATV Special Channels

Содержание 28JF-73E
















Отзывы: