AUTO(D/K)
VHF 1
48.25MHz
1
SECAM
D/K
TV/VIDEO
TV
0
4
7
2
8
3
6
9
CH
CH
1
5
MENU
SURROUND
LANGUAGE
NORMAL
CH
CH
Number
buttons
MENU
Auto channel tuning
Automatically tunes in and presets receivable TV stations.
!
Press
MENU/PRESET
for more than two seconds.
@
Press
MENU/PRESET
again to display AUTO mode screen.
• Pressing
MENU/PRESET
changes the screen as shown below.
#
Press
/
on TV set.
• All the TV stations in your area that can be received by
the TV set are automatically preset between channels 1
to 99.
• The screen shows whatever is on channel 1 when auto
channel preset is finished.
[ TV Set ]
Manual channel tuning
Enables manual channel tuning to a desired TV station.
!
Press
MENU/PRESET
for more than two seconds.
@
Press
MENU/PRESET
twice to display MANUAL mode
screen.
• Pressing
MENU/PRESET
changes the screen as shown below.
#
Press
CH
/
CH
or number buttons to
select channel position.
$
Press
/
on TV set to locate channel you wish to preset to current
channel position.
• Search is initiated and when a TV signal is received during the search, the search stops.
%
Repeat steps 3 and 4 above, to preset channel positions for other broadcasts.
^
Press
MENU/PRESET
again to display normal screen.
• SOUND SYSTEM may not have been set correctly, if noise can be heard or if there is no sound. In such cases, adjust
the SOUND SYSTEM using the
MENU
on the remote control.
• AUTO PRESET stores all receivable channels including those which may be very weak and not clearly visible. To
preset only those channels designated for the local viewing region, use MANUAL PRESET.
E7
PRESETTING CHANNELS
MENU/PRESET
CH
CH
Language
MANUAL
Normal screen
AUTO
MANUAL(D/K)
VHF 1
48.25MHz
Language
MANUAL
Normal screen
AUTO
Channel setting
Enables individual channel setting.
!
Press
MENU
to call MENU screen.
@
Press
CH
/
CH
to select “CH-SETTING”.
#
Press
/
to display CH-SETTING
menu.
$
Press
CH
/
CH
to select desired setting.
%
Each time you press
/
, setting for
individual items change as follows:
• POSITION
The channel position changes to the higher or lower number.
• COLOUR
• SOUND
• SKIP
ON
OFF
Channel numbers with a “
” mark on the left are set to SKIP. To turn off SKIP, press the number
buttons to select the desired channel and then set “SKIP” to “OFF”.
• FINE
The frequency changes to allow fine tuning.
^
Press
MENU
until normal screen appears.
• When you select AV for the channel position, the
CH-SETTING menu changes as shown on the right and
the colour mode changes in the following order:
MENU
PICTURE
SOUND
FEATURE
TIMER
CH-SETTING
MENU
:ENTER
:RETURN
:SELECT
CH
CH-SETTING
POSITION
CH27
COLOUR
AUTO
SOUND
D/K
SKIP
OFF
168.25MHz
MENU
:ADJUST
:RETURN
:SELECT
CH
FINE
TV/VIDEO
TV
0
4
7
2
8
3
6
9
CH
CH
1
5
MENU
SURROUND
LANGUAGE
NORMAL
CH
CH
MENU
CH-SETTING
POSITION
AV
COLOUR
AUTO
MENU
:ADJUST
:RETURN
:SELECT
CH
AUTO
SECAM
N443
PAL
N358
AUTO
SECAM
N443
PAL
B/G
D/K
I
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving signal system
and changes the reception system of the TV set. When the picture is not stable, switching to an appropriate system
may improve the picture quality.
• When using FINE, the channel number changes from green to yellow.
E8
SETTING AND ADJUSTMENT
21L-FG1RU[EN]
3/8/06, 2:03 PM
4
