background image

Channel setting

Enables individual channel setting.

!

Press 

MENU

 to call MENU screen.

@

Press 

CH

 / 

CH

 to select “CH-SETTING”.

#

Press 

 / 

 to display CH-SETTING

menu.

$

Press 

CH

 / 

CH

 to select desired setting.

%

Each time you press 

 / 

, setting

for individual items change as follows:

• POSITION

The channel position changes to the higher or lower number.

• COLOUR

• SOUND

• SKIP

ON 

 OFF

Channel numbers with a “

” mark on the left are set to SKIP. To turn off SKIP, press the number

buttons to select the desired channel and then set “SKIP” to “OFF”.

• FINE

The frequency changes to allow fine tuning.

Only for 21K-FD5RU

• NICAM/A2 stereo system

ON (NICAM sound or A2 stereo sound) 

 OFF (Monaural TV sound)

BOOSTER

Picture quality may improve in regions with weak signal strength using this
function.

• If ON  is selected and the picture quality is still not good enough, please switch to ON .
• If signal strength is strong enough for the selected channel, the effect is negligible and may

produce instability. In such a case select “OFF”.

^

Press 

MENU

 until normal screen appears.

• When you select AV1, AV2 for the channel position, the CH-SETTING menu

changes as shown on the right and the colour mode changes in the
following order:

• Switching COLOUR system:

Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving signal
system and changes the reception system of the TV set. When the picture is not stable, switching to an appropriate
system may improve the picture quality.

• When using FINE, the channel number changes from green to yellow.

E8

SETTING AND ADJUSTMENT

AUTO

SECAM

N443

PAL

N358

B/G

D/K

M

I

ON

ON

OFF

AUTO

SECAM

N443

PAL

N358

PICTURE
SOUND
FEATURE
TIMER

CH-SETTING

POSITION

  CH27

COLOUR

  AUTO

SOUND

  D/K

SKIP

  OFF

FINE

168.25MHz

NICAM/A2

  ON

COLOUR

  AUTO

SOUND

  D/K

SKIP

  OFF

FINE

168.25MHz

NICAM/A2

  ON

BOOSTER

  OFF

LANGUAGE

TV/VIDEO

SURROUND

CH

CH

NORMAL

TV/TEXT

1

2

3

4

5

6

7

8

0

9

MENU

B

A

C

D

MPX

MENU

CH

CH

POSITION

  AV1

COLOUR

  AUTO

21K-FD5RU(05-08)EN

8/12/05, 8:33 AM

8

Содержание 21K-FD3RU























Отзывы: