Standard DIN45325
plug (IEC169-2)
75-ohm
coaxial cable
(round cable)
(not supplied)
300-ohm
twin-lead
flat feeder
(not supplied)
75-ohm
impedance
converter
(not supplied)
Antenna in
TV
Antenna in
TV
VCR
To antenna
in terminal
To RF out
terminal
Connecting to a DVD player
The DVD input terminals (COMPONENT-IN) on the rear of the TV can be used to input high-
quality images from a DVD player.
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
[ Behind the door ]
Using headphone
Insert headphone plug into headphone jack to listen to audio with
headphone.
• The audio from the speakers is turned off.
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before
the power is turned on.
E4
ACCESSORIES
E2
BEFORE OPERATING TELEVISION
Connecting to an antenna
Connecting to an antenna via a VCR
E3
DVD PLAYBACK
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
TV
DVD input terminals
To colour-difference
(component video)
out terminals
To audio out
(L/R) terminals
DVD player
Green : To Y
Blue :
To
P
B
(C
B
)
Red :
To
P
R
(C
R
)
Red : To AUDIO IN (R)
White : To AUDIO IN (L)
Connecting the video terminals
DVD input terminals
DVD player
COMPONENT-IN
VIDEO
Y
Y or Y/Y
P
B
(C
B
)
P
B
(C
B
) or B-Y/Pb
P
R
(C
R
)
P
R
(C
R
) or R-Y/Pr
Watching DVD Playback
!
Press
TV/VIDEO
to select “COMPONENT”, DVD
input screen.
@
Turn on the DVD player and begin playback.
• When connecting the TV to a DVD player via the
COMPONENT-IN terminals, the video and audio from the
DVD player cannot be output through the Audio/Video out
terminals on the TV.
TV/VIDEO
0
4
7
2
8
3
6
9
CH
CH
1
5
MENU
SURROUND
LANGUAGE
NORMAL
TV/VIDEO
C O M P O N E N T
The following accessories are included with this television.
Remote Control
Size-AA batteries
Operation manual
E5
PART NAMES
TV set
Door
Bottom
MENU/PRESET
/
CH
CH
/
POWER
!
!
@
$
% ^
@ #
&
*
(
POWER switch
Turns on and off the main power.
%
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
^
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
$
MENU/PRESET button
Tunes the channels.
Used for MENU setup.
Power indicator
Power can be turned on by the remote control when
the indicator is dimly lit.
#
Infrared sensor window
Receives the infrared wave from the remote control.
&
Video input terminal (AV-2 IN)
Connects to a camcorder, video game, etc.
*
Audio input terminals (AV-2 IN)
Connects to a camcorder, video game, etc.
(
Headphone jack
Use to listen to the audio with headphone.
To open the door
Using the projection located under the
“PULL-OPEN” indication, pull and lift the
door open.
To close the door
Using the projection, lower the door until
closed.
Caution:
• When opening or closing the door, do not insert
your fingers into the gap between the door and
front panel. This may result in an injury.
21K-FD1SF[EN]
14/9/05, 12:04 PM
2
