Sharp 21AG1-SMK3, Руководство по эксплуатации

Страница: 23 / 27

D i m e n s i o n : 1 7 6 x 2 5 0 m m
E 22
P r i n t e l l i g e n c e ( M ) S d n . B h d
ENGLISH
If your outdoor antenna uses a 75-ohm coaxial cable with a standard
DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of
the set.
If your outdoor antenna uses a 300-ohm twin-lead flat feeder, connect a
300-ohm to 75-ohm impedance converter and plug it into the antenna
jack at the rear of the set.
Connecting to an antenna via a VCR
You can also connect the TV set to the tuner on a VCR using the connection shown below.
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
• Turn off the power on the TV set and the VCR being connected before making the above connections.
Be sure the cord plugs are fully inserted in the connection terminals.
• See the operation manual of your VCR for connection details.
Connecting to an antenna
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of
the types of connections that are used for coaxial and feeder cables.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable) (not supplied)
300-ohm twin-lead
flat feeder
(not supplied) 75-ohm impedance
converter
(not supplied)
TV
Antenna in
TV
Antenna in
VCR
To antenna in
terminal
To RF out
terminal
Connections
21AG1-SMK3(22-26)EN 2/11/04, 3:16 PM 22