11. Regulation & Reliability
N. America
TBD : [ FCC-B, UL (c-UL), CB, NOM.]
S. America
TBD: [FCC-B, UL (c-UL), CB, NOM ]
China
TBD : [CCC, CB]
Asia/PAL
TBD: [C-Tick, CE, CB]
Taiwan
TBD: [BSMI, CB, FCC]
Compliance
Europe
TBD:[CE, CB, SASO (Saudi Arabia), GOST (Russia), ROHS,
"HD" Logo]
OtherCertification
HDMI
HDMI Formal Certification on all SKUs with HDMI
Power
Management
SRS
SRS Formal Certification on all SKUs where SRS technology is
used
Environmental Requirements
This display shall meet the following environmental requirements under normal operating conditions.
Operating
5°C to 35°C
Temperature
Non-
Operation
-20°C to 60°C
Operating
20% to 80% (non-condensing)
Humidity
Non-
Operation
10% to 85% (<40°C )(non-condensing)
Operating
0 to 12,000 feet
Altitude
Non-
Operation
0 to 40,000 feet
*Units tested at an altitude up to 12,000 feet must operate at normal conditions without exhibiting
abnormal behavior such as arcing or shutdown.
Electrostatic Discharge Requirements
This display shall withstand 4kV for contact discharge and 8kV for air discharge of Electrostatic
Discharge to meet the acceptance criteria as specified in EN55024.
Mean time between failure (MTBF)
**For the purposes of demonstrating the MTBF of this product, a failure is defined as the inabilityof
the product to function in accordance with this specification. A failure event interrupts the
expectedoperation of the product and requires service or repair to restore the product to full
functionality.
**The MTBF of this product shall be demonstrated to meet or exceed 50,000 hours @ 25 °C at a
90% lower confidence limit under all operating conditions as specified in previous section. ( Lamp
life is not included )
**All components including power and inverter shall be derate to 80% for active devices, 80% for
under worst case conditions. capacitors and 50% for resistive components, except for polarized
capacitors which may be operated at 90% of voltage - which are all calculated
Mean Time Between Replace (MTTR)
**This display shall be well designed to take less than 5 minutes for replacing control board or
inverter board.
**Note: If there is anything not clarified or specified on this specification, PVT sample shall be a
standard reference.
88
190TW8 TV
Содержание 190TW8FB
