420 774 335 397 www.sharks-shop.cz Stránka 22
DESCRIPTION
1. power cord
2. handle
3. indicator for indicating heating up
4. indicator light heating up
to a maximum temperature
5. heat-insulating cover
6. heating board
7. support
8. matrix
TECHNICAL SPECIFICATIONS
voltage/frequency:
230V/50Hz
rated power:
800 W
temperature controller:
0-300 °C
pair of extensions:
20, 25, 32, 40, 50, 63 mm
projected temperature:
15 minutes
total weight:
2.65 kg (weight welder 0.84 kg)
USING
1. Place the machine on the supporting board well. Install corresponding matrixes according to
specifications neede. Tight matrixes with wrench smaller sizes in front generally.
2. Turn on power (caution: power supply must be earthed). Green indicator shows the machine is
heating, red indicator shows the machine has stopped heating and it is time for work.
3. Cut the pipe. Push the pipe or fitting into matrix for some time (see the table). Pull them out rapidly
and then insert not screw to the depth needed steadily.
Note: If it is under 5°C, 50% more heating time is needed.