420 774 335 397 www.sharks-shop.cz Stránka 29
PERFORMANCE
Your new miter saw Sharks, type SH 870 will surely satisfy your expectations. It is manufactured
under the strictest quality standards SHARKS to meet the high criteria for reliable and efficient
operation.
You'll find that your new miter saw easy to operate and provides safe operation. And if you give her
proper care, will provide reliable operation for a long time.
NOTICE
Before using your new product SHARKS read these instructions on operation and maintenance. Pay
special attention to all warnings and cautions.
SHARKS Your product has many features to make your work easier and faster. During the
development of this tool has been paid great attention to safety, operation and reliability with regard to
simple maintenance and operation.
Before use, read this manual, follow all the instructions and keep it for future use.
SYMBOLS
Class II tool symbol, This symbol indicates that this is a class II appliance and does not
require an earth connection.
Waste electrical products should not disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for recycling advice
In accordance with essential applicable safety standards of European directives
Warning
WARNING! The laser guide fitted to this product is a class 2 laser. There are no
user serviceable parts in the laser guide. DO NOT allow children or untrained
personnel to use this product or the laser guide. It is not a toy!
DO NOT stare into beam, DO NOT aim the laser beam at people.
KEEP the laser beam path below eye level where practical.
WARNING! No exchange with different type of laser is permitted. Repairs shall only be carried out by
the laser manufacturer or an authorised agent.
Wear eye protection
Wear ear protection
Wear protective gloves
Wear protective mask
INTENDED USE
This tool is designed for cutting wood and plastic that will fit in machine.
It is not suitable for cutting timber for fuel. Only use saw blades that are suitable for machine and do
not use cutting discs. The manufacture assumes no liability whatsoever for improper use or if the
machine has been tampered with. Give equal attention to safety instructions, assembly and operating
instructions as well as prevailing accident preventions regulations.
The equipment is intended for use only in a power supply which permissible modulus of system
impedance is 0.420
Ω
or less.
