420 774 335 397 www.sharks-shop.cz
Stránka 28
TECHNICAL SPECIFICATIONS
voltage/frequency:
230V/50Hz
power:
25 W
heating power:
10 kW
gas consumption:
0.73 kg/h
port size of the fuel port:
0.74 mm
gas type:
protan/butane
working pressure:
0.7 bar
ignition:
piezo
protection against overheating: 95 °C
turbine output:
320m3/h
weight:
3.8 kg
SAFETY DISTANCE
GENERAL INSTRUCTION
- The heaters mentioned in this manual must only be used outdoors or in well ventilated surroundings.
- For every KW it is necessary to have permanent ventilation of 25cm³, equally distributed between the
floor and high level, with a minimum outlet of 250cm³.
- Gas cylinders must be used and kept in accordance with current regulations.
- Never direct the hot air flow towards the cylinder.
- Use only the supplied pressure regulator.
- Never use the heater without its cover.
- Do not exceed 100W/m³ of free room. The minimum volume of the room must be larger than 100m³.
- Do not obstruct the inlet or outlet sections of the heater.
- If the heater has to work for a long period at its maximum capacity, it’s possible that ice will form on
the cylinder. This is due to excessive vapour withdrawal. Not for this reason, or for any other, should
the cylinder be heated. To avoid this effect, or at least to reduce it, use a large cylinder or two cylinders
linked together (Figure1).
Fig.1