Sharkoon SilentStorm Cool Zero 650, Руководство пользователя, Страница: 9 / 13

9
6.1 Connection for Mainboard and Graphics Card
1. Connect the cable with the 24-pin mainboard connector to the appropriate sockets on the power supply
and to the corresponding sockets on the motherboard.
2. If your mainboard has an additional 4-pin / 4+4-pin CPU connection, plug the connector into the socket on the
motherboard and the power supply.
Please note: The type of connection on the mainboard depends on the manufacturer and may therefore vary.
For additional information, see the manual for your mainboard.
3. If your PCIe graphics card requires additional power, connect the 6-pin or 6+2-pin PCIe connector to the
power supply to ensure a stable electrical current to your graphics card.
6.2 Connecting Drives and Other Peripheral Devices
Connect drives and peripherals to the power supply. For devices with IDE or floppy connections, use the corres-
ponding supplied adapters. Thus, an IDE power connection can be provided from any of the 12 SATA connectors.
Please note: For additional assistance, refer to the manuals for your drives and peripherals.
6.3 Checking all Connections
First, make sure all devices have been connected properly. Close the PC case. Then connect the power cord to
the power supply and to a wall outlet. Then switch on the power supply using the on/off switch on the back of
the device. This completes the installation.
Please note: The cable connectors are designed to prevent improper connection. If the connector does not
fit into the sockets of mainboard, drive or peripheral device, please check if the connector and socket
are being connected in the correct orientation. Do not try to force a connector into a socket using the incorrect
alignment, nor modify the components, otherwise the power supply and your hardware will be damaged. The
SHARKOON warranty does not cover any damage that has been caused by improper handling.
6. Connecting