Sharkoon SilentStorm Cool Zero 650, Руководство пользователя, Страница: 6 / 13

6
3. Installation
3.1 Removal of Existing Power Supply from PC Case
If installing into an empty PC case, continue with the section "Installing the Power Supply into a PC Case".
For a PC case with an already installed power supply, first remove this from the case. Proceed as follows:
1. First shut down your PC. Then disconnect the power cord from the wall outlet and the power supply (PSU).
2. Now open the PC case (for additional information, refer to the manual of your PC case).
3. Disconnect all cables between the power supply and the other PC components (e.g. mainboard, drives,
fans, etc.).
4. Remove the mounting screws connecting the power supply to the PC case and then carefully remove the
power supply from the case.
3.2 Installing the Power Supply into a PC Case
1. Insert the power supply into the PC case and place it against the power supply mounting on the rear panel.
For additional information, see the manual for your PC case.
2. Attach the power supply from the outside of the case using the provided screws. Ensure that the fan and
air vents of the installed power supply are not covered.
3. Use the supplied cables to connect the power supply to the components. The connectors are coded to avoid
connecting incorrectly. Please pay attention to the labeling of the connections on the power supply.