3x connector cable for peripheral devices
(black 6-pin PSU connector) for optical
drives and HDDs (2 connectors 4-pin
each)
3x SATA connector cable
(blue 6-pin PSU connector) for SATA
drives (2 connectors each)
1x cable adapter (4-pin peripheral
devices > 4-pin floppy connector)
5. Installation
Remove an already installed PSU from the case. Proceed as follows:
1. Switch off your PC. Disconnect the PSU’s power cord from the wall outlet and your
PSU. Unplug all cables connected to the PC case (e.g. keyboard, mouse etc.).
2. Open the PC case (for additional information refer to the PC case’s manual).
3. Disconnect all cable connections between the PSU and other PC components (e.g.
mainboard, HDDs, drives, fans etc.).
4. Remove the mounting screws connecting PSU and PC case and carefully take the
PSU out of the case.
5.1 Installing the SilentStorm CM PSU into a PC case
1. Insert the SilentStorm CM into the PC case and put it against the PSU bracket on
the case’s back side.
2. Screw the PSU to the case from the outside using the included screws. Pay
attention not to cover the fan/air intake of the built-in PSU.
SILENTSTORM CM
25
ENGLISH