QP500
QP600
9
5. Troubleshooting
In case the power supply does not work properly, check the following topics:
1. Is the power cord correctly connected to a wall outlet and the PSU’s power connector?
2. Make sure the on/off switch is turned to the “I” position.
3. Check if the main power connector is correctly plugged to the mainboard.
4. Check if the power connectors are properly connected to the peripheral devices in case the short circuit
protection function was activated when switching on the PSU.
5. Turn the power switch off and back on several times with a minimum cycle pause of 5 seconds.
6. In case the PSU still does not start, contact [email protected].
6. Cable diagrams
20+4-pin ATX power connector
4+4-pin P8 power connector
6/6+2-pol. PCIe-Stromanschluss
SATA power conn 4-pin power connector for floppy
SATA power conn 4-pin power connector for peripherals
