QP500
QP600
8
3. In case your PCIe graphics card is equipped with an additional power connector, also plug the 6-pin
(fig. 3a) or 6+2-pin (fig. 3b) PCIe power connector which will provide a stable power support for your
graphics
card.
fig.
3a fig.
3b
4.2.3 Connecting optical drives and other peripheral devices
1. Connect the 4-pin plug (fig. 4), the SATA plug (fig. 5) and the 4-pin floppy plug (fig. 6) to the respective
peripheral
devices.
fig.
4
fig.
5
fig.
6
Note:
For more information refer to the respective manuals of your drives and peripheral devices.
4.2.4 Checking all connections
Make sure that all devices are connected properly then plug the PSU’s power cord to a wall outlet and
switch the power supply on. This ends the installation of the PSU.
