sharkclean .com
sharkclean .com
ASSEMBLY
1.
Slide the
Wand
onto the neck of the
PowerFins
Floor Nozzle
until it clicks into place.
2.
Align the
Hand Vacuum
nozzle opening with the top
of the wand and slide it on until it clicks into place.
3.
Make sure the
Dock Base
is facing upright. Slide
the
Charging Post
into the slot on back of dock
until it clicks.
4.
Place the dock on the floor near a wall outlet.
Plug the
Power Cord
into the outlet, then
connect the cord to the port on the back of the
charging post.
5.
Store cleaning accessories on the mount on
the dock.
For proper operation, ensure all components are
completely connected and clicked into place.
LI-ION BATTERY
Prior to first use, charge the battery completely. A full charge takes approximately 3.5 hours.
Visit
sharkclean.com/support
online.
When the Shark® Li-ion battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for
recycling. Contact your local recycling center for information on where to drop off the spent battery.
Wand
Hand Vacuum
Storage Clip
Handheld
Vacuum
PowerFins
Floor Nozzle
RECYCLING THE LI-ION BATTERY
LED BATTERY POWER AND CHARGING INDICATORS
NOTE:
The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
NOTE:
Once the charging post is installed, it can’t be removed.
RUNTIMES PER FULLY CHARGED BATTERY
2.
(Click)
1.
(Click)
4. Power Cord
3.
Assembled
Dock
Charging
Low
Mid
Nearly Full
Charge
Charge
Full
Charge
NOTE:
Full charge takes approximately 3.5 hours per battery.
LEDs will shut off 5 minutes after achieving full charge.
In Use
Full
Mid
Low
Nearly No
Charge Charge Charge Empty Charge
5.
Accessory
Storage
