A
Handheld Vacuum
B
DuoClean® PowerFins Floor Nozzle
C
MultiFLEX® Wand
D
Crevice Tool
E
Dusting Brush
F
Charger
G
HEPA Post-Motor Filter (Pre-Installed)
WHAT’S INSIDE:
POWER SETTINGS
LI-ION BATTERY
ASSEMBLY
OFF
BARE FLOOR
SETTING
CARPET SETTING
BOOST MODE
Slide switch to the
top to turn off power.
To begin vacuuming
in
Standard Mode
,
slide switch to the
appropriate setting.
Bare Floor/Area Rugs
Slide switch to the
middle. The brushroll
spins slowly to clean
bare floors and small
area rugs.
Carpet
Slide switch to the
bottom. The brushroll
spins faster to pick up
debris below the surface
of your carpets.
For an added boost in
power, pull the
Trigger
on the handheld
vacuum. Release it
to return to standard
power.
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select the Carpet setting and pull the
trigger to go into Boost mode.
NOTE:
Select Carpet setting for stuck-on dirt and debris.
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE:
Full charge takes approximately 3 hours.
CHARGING
To charge, remove the
handheld vacuum from the
wand by pressing the Wand
Release button and pulling
up. Plug the charger into
the charging port.
To put the vacuum in storage
mode, press the
MultiFLEX
Lock Release
button while
folding the handheld vacuum
forward until the wand clicks
and locks. Plug the charger
into the charging port on
the battery.
Battery Indicator Lights
Battery Runtime
MODE
MINUTES
Hand Vac
50
Bare Floor/
Standard Mode
34
Carpet Mode/
Standard Mode
23
Boost Mode
(Hand Vac)
10
NOTE:
The battery comes
partially charged. Charge fully
before first use.
E
F
G
D
For additional parts and accessories, visit
sharkclean.com
A
B
C
2
(Click)
1
(Click)
