Shark V3700 Series, Руководство пользователя

Страница: 9 / 16

9 www.sharkninjamanuals.com
1 Always make sure that the unit
is turned off. (Fig. 2)
2 Insert the charger plug into the
hole on the back of the unit. Plug
the charger into a wall outlet.
The light next to the power
button will illuminate when the
unit is charging. If the unit is
plugged in and the light is not
illuminated, press the power
button once. The light should
now be illuminated indicating
that the unit is charging.
(Fig. 3)
Once the charge is completed,
the light will go off.
Fig. 4
CHARGING YOUR SHARK
®
CORDLESS SWEEPER
3 Charge the battery for 5 hours
before initial use and 5 hours
for each recharge. Our Cordless
Sweeper is powered by Li-Ion
batteries that need this time to
build up their charge. Once the
charge is complete, the LED will
illuminate green.
4
For best battery performance,
remove the charging adapter
from the unit after the charging
period has completed. Storing
the unit with the adapter
attached and plugged in will
reduce the battery life.
IMPORTANT: Although
many adapters look similar,
it’s important to use only the
adapter that came with the unit
(CHV3700BS/CHV3700EUK/
CHV3700EU).
NOTE: The charging light will
flash if the battery power is low.
Fig. 2 Fig. 3
4 Do not use the unit to pick
up pieces of string or fabrics.
Do not use the unit to clean
tasselled or frayed carpets.
1
Press the power button to
start the unit. When finished
cleaning, press the power
button again to turn the unit off.
(Fig. 4)
USING YOUR SHARK
®
CORDLESS SWEEPER
2 Do not use the unit to pick up
liquids or clean wet floors.
3 Do not use the unit on concrete,
tar or other rough surfaces.
OFF