Shark UV210CN, Руководство пользователя

Страница: 16 / 26

PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
14
Cleaner W on’t
Run
1. Not properly plugged into
wall outlet.
2. No electricity in wall outlet.
3. On/Off
switch not turned
on.
4. Motor thermostat tripped.
1. Plug in firmly.
2. Reset circuit breaker or replace
fuse.
3. Push on/off switch to on
4. Reset motor thermostat.
Cleaner W on't
Pick Up
1. Full or clogged dust cup.
2. W rong pile height setting.
3. Clogged nozzle or dust
inlet port.
4. Clogged hose.
5. Broken belt(s).
6. Hose not inserted fully.
7. Dirty filters.
8. HEPA filter needs
cleaning or replacing.
9. Debris screen needs
cleaning.
10. Clog somewhere in unit.
1. Clean dust cup.
2. Adjust setting.
3. Remove obstruction.
4. Remove obstruction.
5. Replace belt(s).
6. Push hose in securely.
7. Clean / change filters
8. Clean or replace HEPA Filter or
filter frame.
9. Clean debris screen.
10. Clear blockage.
Cleaner Picks
Up Moveable
Rugs Or
Pushes Too
Hard
1. W rong pile height setting. 1. Adjust setting.
Agitator Does
Not Turn
1. Broken belt(s).
2. Belt(s) installed
incorrectly.
1. Replace belt(s).
2. Check belt changing.
Air Driven
Turbo Brush
Does Not
Rotate Or
Rotates
Slowly
1. Rotating brush, turbine or
elbow obstructed.
2. Belt broken.
3. Hose obstructed.
4. HEPA filter or debris
screen clogged.
1. Clear obstructions.
2. Call 1-800-798-7398.
3. Clear obstruction.
4. Clean HEPA filter or debris
screen.
Air Flow
Restricted
W ith
Attachm ent
Use Sound
Changes
1. Attachment use restricts
air flow.
2. New carpet debris
clogging air path.
1. Check attachment.
2. Remove obstruction.
35
FAMILIARISEZ-VOUS AVEC VOTRE ASPIRATEUR
VERTICAL
13. Tube télescopique
14. Poignée du boyau souple
15. Plumeau autonettoyant
16. Électrobrosse
17. Porte-tuyau
18. Boyau souple
19. Poignée de l’aspirateur
20. Porte-cordon à relâche rapide
21. Cordon d’alimentation
22. Trappe d’admission
23. Relâche de la poignée
24. Brosse à épousseter
25. Brosse à meubles
26. Suceur plat
Spécifications techniques
Tension : 120 V, 60 Hz
Intensité : 12 A
1. Sélecteur de mode silencieux/normal
2. Bouton d’alimentation On/Off
3.
Dispositif de surveillance du filtre
Intelli-Sense
4. Compartiment de rangement
de l’électrobrosse
5. Bouton de relâche de la coupelle
6. Poignée de la coupelle à poussière
7. Coupelle à poussière
8. Plaque du filtre d’échappement
9. Phare
10. Sélecteur tapis-plancher
11. Témoins à DEL
12. Sélecteur de hauteur de tapis
Avertissement : Les illustrations peuvent différer de l’appareil lui-même.