5
www.sharkclean.com
MAXIMIZING THE LIFE OF YOUR
BATTERY
1
To enhance battery life, this vacuum
is equipped with an advanced feature
that will shut off the vacuum when the
battery is almost fully discharged. If
the vacuum shuts off while in use, turn
the power off and charge the unit for
16 hours.
2
Charge the vacuum for 24 hours
before initial use and 16 hours for
each recharge. Do not leave the unit
plugged in past the specified charge
time for optimal battery life.
3
To prolong the life of the battery, run
the vacuum until it is fully discharged
at least once a month.
4
If the vacuum has never been used
or has not been used for an extended
period of time, it will take several
complete charge and run down cycles
to realize the full operational time of
the vacuum.
5
Do not store in areas of high
temperature or humidity
6
Use only adapter model number
D9300-04 supplied by EURO-PRO
Operating LLC. If other chargers are
used, the battery can fail causing
damage to the battery, to the vacuum,
or to personal property.
USING YOUR SHARK
®
CORDLESS STICK VACUUM
USE YOUR CORDLESS STICK
VACUUM TO CLEAN BARE
FLOORS, CARPETS, RUGS,
UPHOLSTERY AND MORE.
1
Place your foot lightly on the top
of the motorized brush and tilt the
handle back to release the unit
from the locked upright position
(
fig. 4
).
• Push the switch to the “
|
” side
to turn the vacuum on to a
speed optimized for bare floor
cleaning.
• Push the switch to the “
||
”
side to turn the vacuum on to
a speed optimized for carpet
cleaning.
• Push the switch to the “
O
” to
turn the unit off.
fig. 4
BARE FLOOR CLEANING
OFF
CARPET CLEANING
BATTERY REMOVAL, REPLACEMENT
AND DISPOSAL
The cordless stick vacuum is powered by
Ni-Cd batteries, which must be recycled
or disposed of properly in accordance with
state, federal and local laws. If uncertain
as to how to remove the battery pack, we
suggest that you take your stick vacuum
to a reputable small appliance service
technician to have this service performed.
BATTERY REMOVAL
1
Ensure that the unit is Off and not
plugged into the charger.
2
Never open the battery compartment
except to replace or dispose of the
battery pack.
Remove the two screws on either side
of the battery cover on the back of
the unit. Set the cover and the screws
aside.
3
Carefully lift the battery pack from
the bottom and slide it out of the
compartment.
4
Grasp the terminals on the white wires
and pull firmly to disconnect. Do the
same for the red wires, taking care not
to touch the wires together.
5
The battery pack must be recycled or
disposed of properly in accordance
with local regulations.
BATTERY REPLACEMENT
1
Connect the terminal on the white wire
of the new battery pack to the terminal
on the white wire inside the battery
compartment. Firmly push them
together, ensuring they are completely
connected such that the black parts
of the terminals are touching. Do the
same for the red wires. Place the
new battery pack into the battery
compartment, label side facing out
2
Take care to tuck the wiring
completely in so that the wiring does
not interfere with the battery cover.
3
Insert the battery cover bottom side
first, then push in the top and replace
the screws on either side.
CAUTION:
• Use only with battery pack supplied.
• Never use ordinary batteries for
replacement as these may leak and
damage your vacuum
• Do not attempt to remove the battery
pack from the unit to charge.
• Never throw the battery pack or the
appliance into a fire or incinerate it.
• Do not remove or damage the battery
casing.
• Do not place the batteries on metal
surfaces.
• Do not touch metal parts of the
batteries together as the batteries will
overheat.
Call customer service at
1 (800) 798-7398 or visit our web
site at www.sharkclean.com to
order a replacement battery pack.
SV800 N54_E_IB_100823.indd 5
10-09-01 11:37 AM
