Using Your Cordless Vacuum
1. Unplug unit from charger.
2. To start the unit, slide the "On/Off"
switch to the "On" position.
3. To stop the vauum cleaner, slide
the "On/Off" switch to the "Off"
position.
OPERATING INSTRUCTIONS
Changing & Cleaning the Dust
Cup Filter
To achieve the best performance,
empty the dust cup container and
clean the dust cup filter after each
use.
1. To remove the dust cup container,
press down on the dust cup release
button and pull off the dust cup
container.
2. Pull out the dust cup filter.
3. Empty the dust from the dust cup
container. (Fig. 6)
Fig. 6
Assembly
5
Note: Dust cup filter must always be
used when operating the hand
vacuum.
1. To open the dust cup compartment,
push the dust cup release button
and remove the dust cup container.
(Fig. 2)
2. Verify that the dust cup filter is
inside, then re-attach the dust cup
container to the hand vacuum.
(Fig. 3)
Dust Cup Release Button
Fig. 2
Fig. 3
4. Rinse the dust cup filter in cold water,
and then wait until it dries completely
before replacing it back into the dust
cup container. Do
not
use a washing
machine to clean the dust cup filter.
Do not use a hair dryer to dry it.
Air
dry only.
5. Replace the dust cup filter carefully
into the dust cup compartment.
NEVER
operate vacuum cleaner
without dust cup filter in place.
6. Attach the dust cup container to the
cordless vacuum.
Note:
It is recommended that the dust
cup filter be replaced every three (3)
months to ensure peak performance of
the unit.
CAUTION:
The suction inlet must be
open and free of any obstructions at all
times. Otherwise, the motor will
overheat and could become damaged.
