Shark STRATOS DuoClean PowerFins HairPro AZ3000 Series, Руководство пользователя

Страница: 6 / 11

sharkclean .com sharkclean .com
quantities please refer to Product Information Sheet. Images shown in this document should not be used for color, refer only to call outs for color. Nothing is to be considered full scale unless explicitly stated. For
EMPTYING THE DUST CUP
To remove
Dust Cup
, press release button on
top of the pod. Tilt dust cup away from wand,
then lift to remove.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.
To empty debris into the trash, push the lever
on the back of the dust cup and the lid will
drop open. To close the lid, pull the lever
back until it clicks into place.
To remove collected debris from Lint Screen ,
press
Handle Release
button and lift handle
to access screen.
CLEAN HEPA FILTER EVERY YEAR
With the dust cup removed, pull the tab on the bottom of the pod to release the Filter Door .
Lift off the door, then remove the HEPA Filter .
To reinstall, insert HEPA Filter into unit and replace filter door.
CLEAN PRE-MOTOR FILTERS
EVERY MONTH
Remove
Dust Cup
, then lift out the
Foam
and
Felt Filters.
Regularly rinse and replace the filters to
maintain your vacuum’s suction power and
to maximize the effectiveness of the odor
neutralizer technology.
To prevent damage from cleaning chemicals,
rinse filters with cold water only. Allow all
filters to air-dry for at least 24 hours before
reinstalling them to prevent liquid from being
drawn into electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT: DO NOT
use soap when
cleaning the filters.
IMPORTANT: Unplug the power cord before performing any maintenance.
Filter
Door
Release
Filter Door
HEPA
Filter
NOTES:
• The pre-motor filters should be replaced every 2.5 years. The HEPA filter should be replaced every 3 years.
• Vacuum seal is effective against inanimate allergens such as dust and dirt particles.