sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushrolls, step on
floor nozzle and tilt handle back.
Press power button to turn on vacuum.
Please note the brushrolls will not spin
unless the wand is reclined.
Solid White Lights:
The brushrolls are spinning and the unit is working as it should.
Solid Red Lights:
There is a jam in the brushroll area. Turn off the vacuum and unplug it, then
remove any blockages in the nozzle.
Flashing Red Lights:
The motorized floor nozzle is overheating. Turn off the vacuum, unplug
it, and remove any blockages. Let the vacuum cool down for at least 60 minutes before
restarting. See Troubleshooting section for more information.
Flashing White Lights:
The vacuum is operating in an environment that is either too hot or
too cold. This vacuum will only function properly in temperatures ranging from 32°F (0°C) to
104°F (40°C). Turn the vacuum off and adjust the room temperature.
Press the
Wand Release
button to
detach the wand from the pod.
Thick Carpet & Area Rug Cleaning
Slide the surface switch to the top position
to select Thick Carpet/Area Rug.
Carpet & Low Pile Cleaning
Slide the surface switch to the middle position
to select Carpet/Low Pile to increase the
speed of the brushrolls and to help remove
stuck-on dust and debris.
Hard Floor Cleaning
Slide the surface switch to the bottom
position to select Hard Floor.
With pod removed, press the
Wand Release
button to detach
the wand from the floor nozzle.
Press the
Handle Release
button to
detach the handle from the wand.
Press the
Lift-Away
button to detach
the pod from the floor nozzle.
UPRIGHT
POWER SWITCH
ABOVE-FLOOR—HANDLE
POWERED LIFT-AWAY®
ABOVE-FLOOR—WAND
SURFACE SELECTOR
LIFT-AWAY®
Dust Cu
p
Release
Dust Cu
p
Release
WHOLE-HOME CLEANING
SETTINGS
HEADLIGHT INDICATOR LIGHTS
NOTE:
For deep cleaning per ASTMF608 (embedded dirt in carpets), please set to
Carpet/Low Pile
mode.
NOTE:
For maximum suction for above-floor cleaning per ASTM F558, set to
Hard Floor
mode.
NOTE:
Try using Hard Floor mode for low pile area rugs.
HEADLIGHTS
The headlights will flash or turn red to
indicate issues that need attention.
Содержание STRATOS DuoClean PowerFins HairPro AZ3000 Series
Страница 10: ...sharkclean com sharkclean com NOTES NOTES ...
