13
14
CUSTOMER CARE - AU: 1800 890 840
CUSTOMER CARE - NZ: 0800 002 999
Cleaning Tip:
The Direct Steam Nozzle creates direct steam spray to clean and sanitise hard to reach nooks &
crannies and other places where germs may build up. Use the Direct Steam Nozzle to loosen and dislodge compact
dirt often found in corner and tight places where traditional methods and cleaning tools tend to push dirt into, making
it tough to reach and clean. Spray direct steam and wipe clean with a wet cloth or paper towel.
Using Your Removable Handheld Steamer with Direct Steam Nozzle
Using Your Removable Handheld Steamer with Garment Steamer
4
Attach the assembled Garment Steamer to the
removable Handheld Steamer by snapping it into the
main nozzle.
(fig. 20)
5
Select the steam setting and wait until the selected
setting indicator light turns solid blue. Press and hold
the steam trigger button, and move slowly up and
down over your garments or upholster.
(fig. 21)
CAUTION:
Do not press the steam trigger while
attaching or removing the Garment Steamer.
6
To remove the Garment Steamer, press and hold down
the Handheld Release Buttons. Then slide out the
Garment Steamer using the grip on top of the Steamer.
Cleaning Tip:
The Garment Steamer is ideal for removing wrinkles from clothing and freshening and grooming
upholstery. A terry bonnet and frame with bristles provides controlled steaming for most types of clothing. A
specialized micro-fibre bonnet is ideal for freshening couches and other upholstery, where odours may accumulate.
CAUTION:
Always determine colour fastness of any
fabric, especially with reds or blues. Take a clean,
moist, warm towel and gently rub a small area on
the fabric that is as out of sight and out of the way
as possible. If colour bleeds onto the towel, you may
need to have the piece professionally cleaned.
1
Select either the thinner, terry cloth bonnet to steam
your garments, or the thicker, shaggier bonnet to
freshen upholstery.
2
Use the lavender loop on the side of the bonnet to
slide over the nozzle opening of the Garment Steamer.
The elastic around the bonnet should hold it firmly in
place around the Garment Steamer opening.
3
Snap the frame with bristles over the Garment
Steamer. For ease of use, we recommend that the
bristles be placed at the top of the Garment Steamer
bonnet.
(fig. 19)
fig. 19
fig. 20
fig. 21
fig. 17
fig. 18
fig. 16
CAUTION:
Do not press the steam trigger until the
Direct Steam Nozzle is snapped into the main nozzle
of your Handheld Steamer.
4
To remove the Direct Steam Nozzle, press and hold
down the Handheld Release Buttons. Then slide out
the Direct Steam Nozzle using the grip.
CAUTION:
Do not press the steam trigger while
removing the Direct Steam Nozzle. Avoid touching
the tip of the Direct Steam Nozzle, as this will be
very hot after steaming.
NOTE:
The Handheld Steamer may continue to emit
steam for a few seconds after the trigger is released.
This is normal, and the steaming will eventually
come to a stop.
FOR SPOT CLEANING AND STEAMING
2
Remove the Direct Stream Nozzle from the storage
clip on the mop handle and attach it by pressing the
nozzle onto the Handheld Steamer until it clicks into
place.
(fig. 16, fig. 17)
3
The Handheld Steamer is automatically set to
SCRUB
mode. Squeeze the steam trigger to activate
steam. To change modes press the
ON/STEAM
SETTING
button to select either
DUST
,
MOP
or
SCRUB mode. You can change the steam mode
while the Handheld Steamer is in standby or in use.
Once the selected setting indicator light has turned
blue, hold down the steam trigger to start steaming.
(fig. 18)
For effective cleaning, hold the steam output nozzle
2.5 - 5 cm away from the surface you’re cleaning.