18
JuGulaire • chin StraP • Kinnriemen • cinturino • cincha
Boucle "Precise lock" • “Precise lock” Buckle • Verschluss „Precise
lock“ • FiBBia “Precise lock” • cierre “Precise lock”
A
B
C
holdinG SyStem
depending on the various versions and the
country concerned, your S 700 S/S 900 C
SharK helmet is equipped with a chin strap
with a “Precise lock” rapid buckle with a
snap lock or one with a double d ring.
the “Precise lock” snap lock system
gives you precise and accurate adjustment
because of the considerable length of its
notched section.
however, it is essential on purchase to
adapt the length of the chin strap to your
measurements. adjust the length of the
strap using the adjusting buckle (figs. a,
B, c and d). choose your S 700 S/S 900
C helmet and attach the holding system.
When the “Precise lock” is adjusted to the
medium position, the chin strap must be
correctly tensioned under the jaw to hold
the helmet firmly without causing you any
discomfort or pain.
to fasten the chin strap, all you have to
do is to thread the tongue into its place on
the buckle until tension is perfect (fig. e).
the tongue connects and is automatically
blocked.
to release the chin strap, you have to pull on
the lever (fig. f) and remove the tongue from
the buckle. although the notched tongue
enables you to change the adjustment pre-
cisely on each use, it is important to check
frequently that the adjustment of the strap
length is correct. Warning: never ride
with the chin strap loose or insufficiently
tightened. even though the interior padding
gives you the impression of being held, your
helmet risks coming off in a fall.
never apply lubricating or acid products or
grease or solvents to the chin strap buckle
parts.
