sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, step on nozzle and tilt
handle back firmly. Press the Power/Surface
Switch to the appropriate floor setting.
Select surface setting:
O Off
I Hard Floor
For bare floors and small area rugs.
II
Carpet
For carpets.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as it should.
Solid Red:
There is a jam in the brushroll area. Turn off the vacuum and unplug it, then remove
any blockages in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and
remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting.
See Troubleshooting section for more information.
Suction Control
offers variable suction
based on your needs. Slide to
MIN
to reduce
suction and increase maneuverability on
carpets. Slide to
MAX
to increase suction on
bare floors.
With pod removed, press the Wand Release
button to detach the wand from the pod.
Press the
Handle Release
button on the back
of the wand to detach the handle from the wand.
Press the
Lift-Away
button to detach the pod
from the floor nozzle.
UPRIGHT
POWER/SURFACE SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—HANDLE
LIFT-AWAY™
SUCTION CONTROL
LIFT-AWAY—WAND
Min Max
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), use Carpet mode and set suction control to Max.
NOTE:
The brushroll spins in both modes.
