FI
LT
ER
ACCESS
EMPTYING THE DUST CUP
1
Detach the removable Dust Cup from the Motorised Floor Nozzle by pressing the Dust Cup Release Foot Pedal located on the left side near the nozzle�
2
Holding the Dust Cup by the handle, lift it up to remove it from the Motorised Floor Nozzle�
3
Hold the Dust Cup over a rubbish bin, then press the Empty button on the side of the Dust Cup� The bottom lid will open, allowing the debris to fall out�
4
Clean the dust screen inside the Dust Cup as required�
MAINTENANCE
To keep your vacuum’s suction power optimal, follow these instructions.
IMPORTANT: Allow ALL filters to dry completely before replacing in the vacuum.
Make sure unit is off and cord is unplugged.
CLEANING THE FILTERS
Pre-Motor Filters
5
Access the Pre-Motor Filters by pressing the FILTER ACCESS latch on the
top of the Dust Cup� Remove and rinse the foam and felt filters
every
month
� Let air-dry
COMPLETELY
before replacing in the vacuum� Hand
wash only� Tap loose dirt off filters between washes as needed� Insert
the felt filter first, and then place the foam filter on top of it�
Post-Motor Filter
6
Access the Post-Motor Filter on the top of the Motorised Floor
Nozzle� Remove and rinse
once a year
� Let air-dry completely before
replacing� Hand wash only�
Post-Motor Filter
Pre-Motor Filters
Filter Access Latch
Foam
Felt
STEP 1
STEP 2
STEP 3
RECOMMENDED FILTER CLEANING SCHEDULE:
Pre-Motor Filter Kit (Foam & Felt):
XFFH400
Every month
Post-Motor Filter:
XEXFH400
Every year
7
w w w. shar kclean .eu
