A
Handheld Vacuum
B
Motorized Floor Nozzle
C
Wand
D
Pet Multi-Tool
E
8" Crevice Tool
F
Li-Ion Charger
G
Post Motor Filter (Pre-Installed)
WHAT’S INSIDE:
POWER SETTINGS
ASSEMBLY
For complete maintenance instructions, see the enclosed Owner's Guide.
For additional parts and accessories, visit
sharkaccessories.com
.
For additional batteries and charging accessories, visit
sharkclean.com/batteries
.
A
B
C
2
(Click)
1
(Click)
OFF
BARE FLOOR
SETTING
CARPET SETTING
BOOST MODE
Slide switch to the
top to turn off power.
To begin vacuuming
in
Standard Mode
,
slide switch to the
appropriate setting.
Bare Floor/Area Rugs
The brushroll spins slowly
to clean bare floors and
small area rugs.
Carpet
The brushroll spins
faster to pick up debris
below the surface
of your carpets.
For an added boost in
power, pull the
Trigger
on the handheld
vacuum. Release it
to return to standard
power.
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select the Carpet setting and pull the
trigger to go into Boost mode.
NOTE:
Select Carpet setting for stuck-on dirt and debris.
LI-ION BATTERY
CHARGING
To charge, remove the handheld vacuum from the wand by
pressing the Wand Release button and pulling up. Plug the
charger into the charging port.
Battery Indicator Lights
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE:
Full charge takes approximately 3 hours.
©2019 SharkNinja Operating LLC.
Battery Run Time
MODE
MINUTES
Hand Vac
40
Bare Floor/
Standard Mode
25
Carpet Mode
25
Boost Mode
(Hand Vac)
10
NOTE:
The battery comes
partially charged. Charge fully
before first use.
E
F
G
D
