STORAGE
Hang the handheld
vacuum on the hook
on the bottom of the
wand, and wrap the
power cord around
the cord hooks.
Onboard Hook
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
©2019 SharkNinja Operating LLC.
NOTE:
If you see any hair wrapped around the brushroll, continue
cleaning, using Setting II, Carpet, on bare floors. This will allow the
self-cleaning brushroll to remove the hair wrap and send it to the
dust cup.
MAINTENANCE
DUST CUP
Brushroll Maintenance
With the garage lid removed, carefully clear away any
debris that may be impeding the brushroll.
Checking the Nozzle for Blockages
Tilt neck of nozzle back to straighten the airway, then
remove any blockages.
Brushroll/Soft Roller Access
1. To open the brushroll garage, slide both release buttons
on the floor nozzle away from you, toward the back of the
nozzle, then lift off the lid.
2. To close the brushroll garage, insert the 3 tabs on top of
lid into the 3 slots in the nozzle, then push down on both
sides of lid until it clicks securely into place. If Brushroll
Indicator Light is green and headlights are flashing, check
again that both sides of lid are locked in place.
Cleaning the Soft Roller
Open the brushroll garage. Lift out the Soft Roller by
pulling the tab on the right side. Clear away any debris,
then slide the Soft Roller back into place.
Empty dust cup every time debris reaches the MAX fill line.
Empty
Dust Cu
p
Release
With the dust cup
attached to the
handheld vacuum, hold
the dust cup over a trash
bin and press the Empty
button on the front of
the dust cup.
To remove the dust cup
from the handheld vacuum,
squeeze the two Dust Cup
Release buttons at the same
time and pull out the dust
cup. Holding the dust cup
over a trash bin, press the
Empty button on the front
of the dust cup.
NOTE:
Wrap the power cord around the top hook first, leaving a
little slack.
