background image

3

4

1-800-798-7398

s h a r kc l e a n . co m

 

THE FLOOR NOZZLE, WAND, AND 
HANDLE CONTAIN ELECTRICAL 
CONNECTIONS:

•   These are not serviceable parts.
•   Do not use to vacuum any liquids.
•  Do not immerse in water.
•  If handle/wand is damaged, discontinue use.

1

   Inspect power cord and plug for any 

damage before use. DO NOT use vacuum 
cleaner with a damaged cord or plug. 
Turn off all controls before plugging in or 
unplugging the vacuum cleaner. Store 
your vacuum cleaner with the power cord 
secured around the two cord hooks.

2  

DO NOT use outdoors or on wet surfaces. 
Use only on dry surfaces.

3

  Unplug from electrical outlet when not in 

use and before servicing.

4

  If vacuum cleaner is not working as it 

should, has been dropped, damaged, left 
outdoors, or dropped into water, return it to 
SharkNinja Operating LLC for examination, 
repair, or adjustment.

5

   DO NOT pull or carry vacuum cleaner by 

the cord or use the cord as a handle.

6

  DO NOT unplug by pulling on cord. Grasp 

the plug, not the cord.

7

  DO NOT handle plug or vacuum cleaner 

with wet hands.

8

   DO NOT run the vacuum cleaner over the 

power cord, close a door on the cord or 
pull the cord around sharp corners.

9

  The use of an extension cord is NOT 

recommended.

10

  DO NOT leave vacuum cleaner when 

plugged in.

11

  Keep cord away from heated surfaces.

GENERAL USE

12 

Use only as described in this manual.

 13

  Keep your work area well lit.

14

   Keep the vacuum cleaner moving over 

the carpet surface at all times to avoid 
damaging the carpet fibers.

15

   DO NOT place vacuum cleaner on unstable 

surfaces such as chairs or tables.

16

   DO NOT put any objects into openings. DO 

NOT use with any opening blocked; keep 
free of dust, lint, hair, and anything that 
may reduce airflow.

17

   DO NOT allow the appliance to be used by 

children. Close attention is necessary when 
used near children. This is not a toy.

18

  DO NOT use without dust cup and/or filters 

in place. 

19

   DO NOT use if airflow is restricted. If 

the air paths or the floor nozzle become 
blocked, turn the vacuum cleaner off and 
unplug from electrical outlet. Remove 
all obstructions before you turn on the 
unit again.

20

  Keep nozzle away from hair, face, fingers, 

uncovered feet, or loose clothing.

 21

   Only use manufacturer’s recommended 

attachments.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum:

22

  Make sure that all filters are thoroughly dry 

after routine cleaning.

23

  Make sure that dust cup and all filters are 

in place after routine maintenance. 

24

  Make sure brushrolls are free of blockages 

by removing hair and carpet fibers.

25

  Only use Shark

®

-brand filters and 

accessories (failure to do so will void 
the warranty).

GENERAL CLEANING

26

  DO NOT vacuum large-sized objects.

27

  DO NOT vacuum hard or sharp objects 

such as glass, nails, screws, or coins that 
could damage the vacuum cleaner.

28

 DO NOT vacuum up drywall dust, 

fireplace ash, or embers. DO NOT use 
as an attachment to power tools for dust 
collection.

30

  DO NOT vacuum up smoking or burning 

objects such as hot coals, cigarette butts, 
or matches.

31

   DO NOT vacuum up flammable or 

combustible materials (e.g., lighter fluid, 
gasoline, or kerosene) or use vacuum in 
areas where they may be present.

32

  DO NOT vacuum up toxic solutions (e.g., 

chlorine bleach, ammonia, or drain cleaner).

33

  DO NOT use in an enclosed space 

where vapors are present from paint, 
paint thinner, moth-proofing substances, 
flammable dust, or other explosive or toxic 
materials.

34

  DO NOT vacuum up any liquids.

35

  DO NOT immerse vacuum cleaner in water 

or other liquids.

36

  Use extra care when cleaning on stairs.

37

 Remove brushroll from unit before rinsing.

POLARIZED PLUG

To reduce the risk of electric shock, this 
vacuum cleaner has a polarized plug (one 
blade is wider than the other). As a safety 
feature, this plug will fit into a polarized outlet 
only one way. If the plug does not fit fully into 
the outlet, reverse the plug. If it still does not fit, 
contact a qualified electrician. DO NOT force 
into outlet or try to modify to fit.

SAVE THESE INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

  WARNING

 

To reduce the risk of injury, fire, electric shock, and property damage 
resulting from improper use of the appliance, carefully observe the following 
instructions� This unit contains electrical connections and moving parts that 
potentially present risk to the user�

Содержание Rocket AH454Q














Отзывы: