background image

13

Using Your Press & Refresh

 - cont.

Care of Your Press & Refresh

Cleaning & Storing

1

   Turn the garment steamer off  

“O”.

2

   Unplug the appliance from the 

electrical outlet.

3

   Let the appliance cool 

completely for approximately  
30 minutes.

4

   Empty the water from the  

water tank.

5

   Wipe the exterior of the 

garment steamer with a damp 
cloth and wipe dry if needed. 

6

   Bundle up the power cord and 

secure it with the VELCRO

®

 

strap that is attached to the 
power cord. Always store your 
appliance in a cool, dry area.

Care & Use of the Small Steam 
Bonnet 

7

  

The steam bonnet helps filter 
impurities from your water. 
It might become slightly 
discolored over time.

8

   Let the steamer cool completely 

before removing the bonnet. 
Gently pull on either side of 
the bonnet to remove from the 
steam nozzle.

9

   Hand wash the bonnet in cold 

water with a mild detergent and 
let air dry completely before 
using again. Do not dry in 
clothes dryer.

10

  To re-attach the bonnet, pull 

one corner of the bonnet over 
the steam nozzle then the other 
corner. Secure the bottom of 
the bonnet to the nozzle using 
the bottom tab.

Descaling Procedure

Your garment steamer must be 
descaled at an interval that will 
depend on the water quality and 
the frequency of use. The garment 
steamer should be descaled at least 
once a year or every 100 hours of 
use. If your water is considered 
hard, increase the frequency of 
descaling. 

11

  

Unplug the steamer and fill the 
unit with 1/3 white vinegar and 
2/3 water.

12

   Turn the steamer on and run 

for 3 minutes; do not steam 
any fabric or clothing with the 
descaling solution.

13

   Turn the steamer off. Unplug 

the steamer and allow to cool 
down for at least 30 minutes.

14

  Empty the water and vinegar 

solution from the steamer.

15

   Rinse the steamer by filling with 

fresh water and wmptying out.

16

  Fill the unit with fresh water 

and repeat steps 12-14.

  

NOTE:

 After descaling if you 

believe that there is still buildup 
in the steamer, repeat this 
procedure. Use a new vinegar 
and water solution every time 
you repeat steps 11 and 12.

Содержание Press & Refresh GS500UKL

















Отзывы: