Shark Powered Lift-Away NV681UK Series, Руководство пользователя

Страница: 9 / 16

8 0 8 0 0 8 6 2 0 4 5 3
RECOMMENDED FILTER CLEANING SCHEDULE:
Pre-motor Filter Kit (Foam & Felt): Every 3 months
Post-motor HEPA filter Every year
Pre-HEPA Filter: Every year
EMPTY THE DUST CUP
1
Pull up on the dust cup release latch and lift the dust cup
off the pod.
2 Holding the dust cup over a bin, press the bottom empty
release latch.
3 Press the top dust cup release latch to access the dust
screen and remove built-up debris as required.
MAINTENANCE
To keep your vacuum’s suction power optimal, follow these instructions.
Make sure unit is off and cord unplugged.
IMPORTANT: Allow ALL filters to dry completely before replacing into the vacuum.
STEP 1 STEP 2 STEP 3
NOTE:
To remove the
pre-HEPA foam filter,
pull out from frame.
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
Filter Access
PRE-
HEPA
PRE-MOTOR
POST-MOTOR
CLEANING THE FILTERS
1 Pre-Motor (foam and felt):
With the dust cup removed, take out the foam
and felt filters, and rinse with water. Tap loose
dirt off filters between washes as needed.
2 Post-Motor (HEPA):
To access the HEPA filter, reach under the grill,
press the button, and pull the grill away from
the vacuum.
To remove the pre-HEPA filter, simply pull
black foam out from frame. Rinse both HEPA
filter and pre-HEPA filter and allow to air dry
completely before replacing. Hand wash only.
Replace it back and make sure edges are
tucked into HEPA frame when HEPA inserted
back into vacuum.