Shark NV500REF, Руководство пользователя

Страница: 5 / 16

3
5
6
5
8 0 0 .7 9 8 .7 3 9 8
1 Press POWER to clean bare floor surfaces, area rugs or areas above-floor. The brushroll will not spin in this mode.
2 Press POWER and BRUSHROLL to clean carpets. The brushroll indicator lights will illuminate GREEN. If there is a jam, the
indicator light on floor nozzle will illuminate RED. Refer to MAINTENANCE section (P9) for instructions on removing blockages.
3 Place your left foot gently on the floor nozzle and tilt the handle back to start cleaning. Note: The brushroll will only spin once
the vacuum is reclined back.
4 To clean with hose, press the WAND or HANDLE release button (depending on the amount of reach required) then lift
handle up.
5 Insert wand or handle directly into desired tool.
6 Pivot back to release tool from accessory clip.
POWER
Bare floor or
wand cleaning
POWER +
BRUSHROLL
Carpet cleaning
UPRIGHT CLEANING
ABOVE FLOOR CLEANING
1
2
4
4
OR
OR