Shark NV22LWM, Руководство пользователя

Страница: 14 / 32

12 TOLL FREE: 1-800-798-7398
Maintenance
Resetting the Motor Thermostat
Your Shark
®
Upright Vacuum is
equipped with a protective Motor
Thermostat. If the motor should
overheat, the thermostat shuts off
the power.
To reset the Motor Thermostat:
Move the Power Button to the
“
O – Off
” position.
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter.
Refer to
Checking for Blockages
on page 11.
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the
“
I – On ” position to start the
vacuum.
Note: if vacuum still does not start,
contact Customer Service at:
1-800-798-7398.
1
Cleaning the Pet Hair Power
Brush -
Turn the Turbo Brush over and
slide locking latch (
A
) forward.
Gently tilt brush housing upward
to open.
Remove debris from turbine
wheel and air passage.
To reassemble, insert the tabs on
the front edge of the cover into
the matching holes in the top
half and tilt the cover back down
until it clicks into place.
A
Ordering Replacement Parts
To order additional parts and
accessories, go to
www.sharkclean.com
or call 1-800-798-7398 .
PART PART NO.
Super Stretch Hose 1114-FC
Dusting Brush &
Crevice Tool
1115-FC
Foam & Felt Filters XF22
Turbo brush 1144-FC
Cleaning Wand 1116-FC