12
TOLL FREE:
1-800-798-7398
STORE YOUR VACUUM SAFELY
1
Store the dusting brush, upholstery brush, the
crevice tool or the power brush on the mounts on
the removable tool caddy. (
fig. 17
)
2
Wrap the flexible hose around the base of the
vacuum and hook the end of the flexible hose into
the hose dock. (
fig. 18
) To release the hose, press
the Hose Storage button.
3
Wrap the attached cord strap around the power
cord when storing.
4
Store your vacuum cleaner with the rest of the
accessories safely in a cool dry area where they
will not be a hazard, will not get damaged and will
not cause damage to anyone or anything.
NOTE:
Empty dust cup after cleaning and prior
to storing. (See “Maintenance” section for
instructions.)
Storing
Your
Shark
®
Lift-Around™
Portable Vac is
equipped with a protective Motor Thermostat. If the
motor should overheat, the thermostat shuts off the
power.
To reset the Motor Thermostat:
Press the Power Button to turn the vacuum off.
Unplug the vacuum.
Check for clogged hose or filter; unclog hose and
replace filter. Refer to
Checking for Blockages
.
Wait 45 minutes for vacuum to cool; then plug in the
vacuum.
Press the Power Button to restart the vacuum.
Note: If vacuum still does not start, contact Customer
Service at: 1-800-798-7398.
Resetting the Motor Thermostat
Ordering Replacement Parts
To order additional parts and accessories, go to
www.sharkclean.com
or call
1-800-798-7398
.
PART
PART NO.
Pre-Motor Filters
XFF318
HEPA Filter
XHF318
Telescopic Tube
1057FT
Upholstery Brush
1061FT
Crevice Tool
1062FT
Dusting Brush
1063FT
Power Brush
1064FT
Fig. 17
Fig. 18
NP319series_40_IB_ENG_120210_3.indd 12
12-02-10 11:38 AM
