15
sharkclean .co.uk
14
sharkclean .co.uk
MAINTAINING YOUR VACUUM
Press the wand release button to detach the
handheld vacuum from the wand�
To remove the dust cup from the handheld vacuum,
press the
Dust Cup Release
button located on the
base/bottom of the dust cup� Tilt the dust cup and lift
off to remove�
To empty dust and debris, hold the dust cup over the bin,
then slide the CleanTouch Dirt Ejector slider forward�
To empty the
Dust Cup
while it is attached to the
handheld vacuum, position the dust cup over a bin
and slide the lid release slider forward�
To clean the interior of the dust cup, rinse it with
water� Place it on its side with the lid open to air-dry
for at least 48 hours before reinstalling�
REMOVING AND CLEANING THE DUST CUP
EMPTYING THE DUST CUP
MAINTAINING YOUR VACUUM
CLEANING THE FILTERS
Regularly rinse the filters to maintain your vacuum’s suction
power and to maximise the effectiveness of the odour cartridge.
To clean filters, rinse them with water only�
Allow all filters to air-dry completely for up to 48 hours before
reinstalling, to prevent liquid from being drawn into electric parts.
Clean the pre-motor filters at least once a month and post-motor filter at least once a year� Tap off loose dirt
between washes when needed� More frequent cleaning may sometimes be necessary with heavy use�
IMPORTANT: DO NOT
use soap when cleaning the filters� Use water only� The vacuum will not have suction if the post-motor
filter is not installed� Ensure that all filters are installed before using�
Remove the dust cup, and pull the foam and felt
filters out of the back of the dust cup�
Remove the dust cup� Pull the post-motor filter out
of the handheld vacuum�
Pre-Motor Foam and Felt Filter Kit
Post-Motor Filter
1
1
2
2
PRE-MOTOR FILTERS
POST-MOTOR FILTER
