4
TOLL FREE:
1-800-798-7398
5
www.sharkclean.com
10
To carry the vacuum:
With the unit in the standing
position, lift by the Dust Cup
Assembly Handle (carry handle).
CAUTION:
When lifting or
carrying,
DO NOT
press Dust
Cup Assembly release button.
Along with your upright unit, you
will find the following components:
a
Vacuum Body
b
Floor Power Nozzle
c
Handle Assembly
d
Super Stretch Hose
e
Cleaning Wand
f
Pet Hair Power Brush
g
Cleaning Attachments
*
Note:
Optional tools are available for sale
for any NV26 or NV27 model:
1-800-798-7398.
Your Shark Navigator
®
Upright
is easy to assemble:
1
Lay your vacuum body on a
level surface.
2
Slide the electrical connection
from the power nozzle into the
main body to click into place.
3
Connect the hose from the main
body to the power nozzle; push
with a slight turning motion to
create a snug fit.
4
Slide the handle assembly
into the upright unit aligning
the hose hook on the handle
assembly with the power cord
hooks on the back of the unit.
5
Secure the handle assembly in
place with included bolt.
6
Place the vacuum in the upright
position.
7
Store the Crevice Tool, Dusting
Brush and Cleaning Wand on
the unit.
8
Attach the Super Stretch Hose:
a)
Snap hose into swivel
connector
b)
Route under anti-tip hook
c)
Route over upper hose
holder
d)
Press securely onto cleaning
wand
IMPORTANT:
To prevent vacuum from
tipping, secure hose under the
anti-tip hose hook.
9
When storing your vacuum,
wind cord around the two cord
holders and secure with cord
clip:
• Quick Cord release at the
top of the unit – place in the
upright position.
• Second holder near the
base – turn until it is pointing
down.
To release the cord, turn the Quick
Cord release to the left or right.
IMPORTANT:
For suction to reach the Floor
Power Nozzle, the Cleaning
Wand and Super Stretch Hose
must be attached securely on
the vacuum body.
a
c
c
e
7
8
9
Getting Started
g
b
f
d
d
b
a
4
5
3
2
