sharkclean .com
sharkclean .com
Clean off any debris on the bristles. Carefully
use scissors within the brushroll groove to cut
away any hair or debris wrapped around the
brushroll.
NOZZLE MAINTENANCE
MAINTENANCE
CHECKING FOR BLOCKAGES
Detach wand from pod and handle, and check both
ends for blockages.
Detach dust cup from vacuum pod. Empty dust
cup and remove debris from lint screen in the top
of the dust cup.
Detach hose from handle by pressing on the
release button at the top of the hose. Detach
the hose from the pod, and check openings
for blockages.
Check the opening at the top of the nozzle for any
blockages.
DUST CUP BLOCKAGES
WAND BLOCKAGES
HOSE BLOCKAGES
NOZZLE BLOCKAGES
DEBRIS WRAPPED
AROUND BRUSHROLL
Detach handle from wand and hose to
check the openings on both ends.
HANDLE BLOCKAGES
To minimize the risk of power cord damage,
DO NOT
run the vacuum over the power cord.
If this occurs, immediately shut off power to
the vacuum and remove the cord from the
brushroll or nozzle.
1. 1.
DO NOT
pull or carry vacuum cleaner
by the cord or use cord as a handle..
2. 2.
DO NOT
unplug by pulling on the cord.
Grasp the plug, not the cord.
3. 3.
DO NOT
close the door on the cord.
4. 4.
DO NOT
pull the cord around sharp
corners.
5. 5.
DO NOT
leave the cord near heated
surfaces.
CORD MAINTENANCE
