Shark Navigator DLX, Руководство пользователя

Страница: 4 / 9

sharkclean .com sharkclean .com
NOTE: All accessories are compatible with both the wand and the hose.
WHOLE-HOME CLEANING
CLEANING MODES
To engage Brushroll , turn power on,
then place foot on floor nozzle and
tilt handle back.
Press the power/surface switch at the top of
the pod.
Select surface setting:
O Power Off
I Bare Floor
For bare floors and small area rugs.
II Carpet
For carpets.
WHAT DOES THE BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green:
The brushroll is spinning and
working as it should.
Solid Red:
There is a jam in the brushroll
area. Turn off the vacuum and unplug it, then
remove any blockages in the nozzle.
No Light:
The vacuum is off.
Flashing Red: The motorized floor nozzle is
overheating. Turn off the vacuum, unplug it,
and remove any blockages. Let the vacuum
cool down for at least 60 minutes before
restarting. See Troubleshooting section for
more information.
To reduce suction for increased
maneuverability on carpets, slide the suction
control button on the end of the hose
forward. To increase suction for cleaning
bare floors, slide the button back.
To clean with more reach, remove the extension
wand from the nozzle hose. Add a cleaning
tool to the end of the wand.
Stand the vacuum upright, and remove the
flexible hose from the top of the wand. Add
a cleaning tool to the end of the hose.
UPRIGHT
POWER/SURFACE SWITCH
ABOVE-FLOOR ABOVE-FLOOR—EXTENDED REACH
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT SUCTION CONTROL
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), select setting II, Carpet, with suction release
set to Max.