Shark KD450W, Руководство пользователя

Страница: 10 / 20

6 TOLL FREE:
1-800-798-7398
Using Your Sonic Duo
™
Carpet, Wood & Hard Floor Cleaner - cont.
IMPORTANT : Make sure the floors are swept
or vacuumed before using the Sonic Duo
™
.
Visit
www.sharkclean.com
for other great quick
cleaning products to complement your
Sonic
Duo
™ , such as the
Shark
®
Rotator
™ vacuums.
4 Twist the quick release cord holder to unwrap
the power cord completely. ( Fig. 17 )
Plug into an electrical outlet and slide the “On/
Off” button down to turn the Sonic Duo ™ on.
Use “ I Low ” setting for hard floor cleaning.
( Fig. 18 )
5
Make sure that the Hard Floor Cleaning Pad
is attached to the
Sonic Duo
™ . This pad has
a “Green” trim and the tag says “Hard Floor
Cleaning Pad”. Attach the side of the Cleaning
Pad with the tag to the back of the
Sonic
Duo
™ . (
Fig. 19
)
fig. 17
fig. 16
IMPORTANT: When cleaning, do not use the
Sonic Duo ™ without attaching a Hard Floor
Cleaning Pad and adding the diluted cleaning
solution to the Reusable Bottle first. When
polishing, do not use the
Sonic Duo ™ without
attaching a Hard Floor Polishing Pad.
Cleaning Your Hard Floors:
1 To remove the Reusable Bottle, hold it and pull it
up to remove from the unit. ( Fig. 14 )
2 Remove the “Green” bottle cap. Add 1 part of
the Sonic Activated Wood & Hard Floor Cleaner
solution to 7 parts water into the Reusable Bottle.
Use the measuring marks on the Reusable Bottle
for easy measuring and filling. (
Fig. 15 ) Always
fill with cold water first up to the “Water Fill
Line” and then the add the cleaning solution
up to the “Solution Fill Line” to avoid
foaming and to ensure accuracy
.
3 Screw the bottle cap on tightly and insert the
Reusable Bottle into the unit upside down. Push
it down to make sure that it is well inserted. You
will hear an audible “Click” when the Reusable
Bottle is inserted properly. (
Fig. 16 )
IMPORTANT : Do not use on unsealed wood
or unglazed ceramic floors. Do not use on wood
or tile floors that are highly worn, unfinished or
have a wax or oil finish. Surfaces that have been
treated with wax or some no wax floors may be
damaged by the cleaning and polishing solutions
therefore it is always recommended to test an
isolated area of the surface to be cleaned before
proceeding. You should always check the use and
care instructions from the floor manufacturer.
fig. 14 fig. 15
fig. 18
fig. 19
KD450W_26_IB_E_130511_1.indd 6 13-03-11 3:43 PM