sharkclean .com
sharkclean .com
QUICK
START
GUIDE
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
For the latest warnings and cautions, go to
sharkclean.com/robothelp
GENERAL WARNINGS
When using an electrical appliance, basic
precautions should always be followed,
including the following:
1.
Robotic vacuum cleaner consists of a
robotic vacuum and charging base with
power supply. These components contain
electrical connections, electrical wiring,
and moving parts that potentially present
risk to the user.
2.
Before each use, carefully inspect all
parts for any damage. If a part is damaged,
discontinue use.
3.
Use only identical replacement parts.
4.
This robotic vacuum cleaner contains no
serviceable parts.
5.
Use only as described in this manual.
DO NOT
use the robotic vacuum cleaner
for any purpose other than those
described in this manual.
6.
With the exception of filters,
DO NOT
expose any parts of the robotic vacuum
cleaner to water or other liquids.
USE WARNINGS
7.
This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
a) Children shall not play with the
appliance.
b) Cleaning and user maintenance shall
not be made by children without
supervision.
8.
Always turn off the robotic vacuum
cleaner before inserting or removing the
filter or dust bin.
9. DO NOT
handle plug, charging base,
charging cable, or robotic vacuum
cleaner with wet hands. Cleaning and
user maintenance shall not be made by
children without supervision.
10. DO NOT
use without robot dust bin and
filters in place.
11. DO NOT
damage the charging cord:
a)
DO NOT
pull or carry charging base
by the cord or use the cord as a
handle.
b)
DO NOT
unplug by pulling on cord.
Grasp the plug, not the cord.
c)
DO NOT
close a door on the cord,
pull the cord around sharp corners,
or leave the cord near heated
surfaces.
12. DO NOT
put any objects into nozzle or
accessory openings.
DO NOT
use with
any opening blocked; keep free of dust,
lint, hair, and anything that may reduce
airflow.
13. DO NOT
use if robotic vacuum cleaner
airflow is restricted. If the air paths
become blocked, turn the vacuum
cleaner off and remove all obstructions
before turning on the unit again.
14.
Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.
15. DO NOT
use if robotic vacuum cleaner
is not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
16. DO NOT
place vacuum cleaner on
unstable surfaces.
17. DO NOT
use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails,
screws, or coins)
d) Large quantities of dust (drywall
dust, fireplace ash, or embers).
DO NOT
use as an attachment to
power tools for
dust collection.
e) Smoking or burning objects (hot
coals, cigarette butts, or matches)
f) Flammable or combustible
materials (lighter fluid, gasoline,
or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
18. DO NOT
use in the following areas:
a) Wet or damp surfaces
b) Outdoor areas
c) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust)
d) Near fireplaces with unobstructed
entrances.
e) In an area with a space heater.
19.
Turn off the robotic vacuum cleaner
before any adjustment, cleaning,
maintenance or troubleshooting.
20.
Allow all filters to air-dry completely
before replacing in the robotic vacuum
cleaner to prevent liquid from being
drawn into electric parts.
21. DO NOT
modify or attempt to repair the
robotic vacuum cleaner or the battery
yourself, except as indicated in this
manual.
DO NOT
use the vacuum if it has
been modified or damaged.
22.
To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will
fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not change the
plug in any way.
23.
In case the self-empty base has a
thermal shutoff the unit needs to have a
hard power reset to restart.
BATTERY USE
24.
The battery is the power source for
the vacuum. Carefully read and follow
all charging instructions.
25.
To prevent unintentional starting, ensure
the vacuum is powered off before picking
up or carrying the vacuum.
DO NOT
carry the appliance with your finger on
the power switch.
26.
Use
ONLY
the Shark® self-empty base
XSKAEDOCK and use only battery
RVBAT850. Use of batteries or battery
chargers other than those indicated may
create a risk of fire.
27.
Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals together increases the risk of
fire or burns.
28.
Under abusive conditions, liquids may be
ejected from the battery. Avoid contact
with this liquid, as it may cause irritation
or burns. If contact occurs, flush with
water. If liquid contacts eyes, seek
medical help.
29.
Robotic vacuum cleaner should not be
stored, charged, or used at temperatures
below 50°F (10°C) or above 104°F
(40°C). Ensure the battery and vacuum
have reached room temperature before
charging or use. Exposing the robot
or battery to temperatures outside of
this range may damage the battery and
increase the risk of fire.
30. DO NOT
expose the robotic vacuum
cleaner or battery to fire or temperatures
above 265°F (130°C) as it may cause
explosion.
31.
Non-rechargeable batteries cannot
be recharged.
BOTBOUNDARY® STRIPS
32. DO NOT
put BotBoundary strips
underneath carpet or rugs.
33. DO NOT
place BotBoundary strips on
top of one another.
34.
Always use BotBoundary strips around
reflective flooring and surfaces.
35.
BotBoundary strips should always be
used near carpeted stairs.
36. DO NOT
place BotBoundary strips within
10 feet of the dock.
37.
For your robot’s cliff sensors to work
properly, all runners, rugs, or carpets
must be eight inches from any stairs (or
it must be continuous and extend over
the edge of the stairs). If a runner, rug or
carpet edge that is less than eight inches
from the stairs cannot be moved, you
must use a BotBoundary strip to block
off the stairs.
Содержание IQRobot SELF-EMPTY XL AV1010AE Series
Страница 1: ...Robot Vacuum AV1010AE Series OWNER S GUIDE...
