s h a r kc l e a n . c o m
s h a r kc l e a n . c o m
CLEANING SENSORS AND CHARGING PADS
CLEANING SIDE BRUSHES
MAINTENANCE
Carefully unwind and remove any string or hair
wrapped around brushes.
Gently wipe brushes with a dry cloth. To reinstall,
snap the brushes over the pegs. Spin the brushes
manually to make sure they are installed correctly.
CLEAN SENSORS AND CHARGING PADS AS NEEDED.
With a dry cloth, gently dust off the sensors and
pads located on the bottom of the robot and on the base.
NOTE:
Remove and replace any side brushes that are bent or damaged. To remove a brush, lift it off its peg.
NOTE:
Tools may be required to pry off front caster wheel.
NOTE:
Brush not included.
IMPORTANT:
The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.
CLEAN SIDE BRUSHES AS NEEDED.
CLEANING THE WHEELS
MAINTENANCE
Pull the
Front Caster Wheel
from its housing and
remove any debris buildup.
REMOVE AND CLEAN THE FRONT CASTER WHEEL AS NEEDED.
See
sharkaccessories.com
for replacement parts.
Clean the wheel housing, then reinsert the
caster wheel.
Periodically clean the drive wheels and the
housing around them. To clean, rotate each drive
wheel while dusting.
Содержание IQ ROBOT SELF-EMPTY XL
Страница 1: ...Robot Vacuum AV1002AE Series OWNER S GUIDE...