and
Release
W
Onboard hook
For compact, convenient storage,
hang the hand vacuum on the hook
on the bottom of the wand, and
wrap the power cord around the
cord hooks. The unit stores easily
in a closet or along a wall.
Press the Wand
Release button on
the top of the wand
to disconnect it from
the handheld vacuum.
Wall mount
Use the wall mount that is included.
See enclosed instruction sheet for
complete installation information.
2
Choose Setting
The Rocket
®
Complete has a 2-speed
power slider switch on the handle. Slide
the power switch to the appropriate
floor setting and start cleaning.
1
Plug The Unit In
Place your foot gently
on the floor nozzle and
tilt the handle back to
start cleaning.
1
Stand the vacuum upright.
Step on the foot pedal
and pull the wand up to
disconnect it from the
motorized floor nozzle.
2
Attach desired
cleaning accessory.
Floor Nozzle
Release
Wand Release
Empty the dust cup every time
debris reaches the MAX fill line.
Handheld
Vacuum Catch
Handheld Vacuum
Storage Hook
NOTE:
Use Setting I for all
above-floor accessories.
HAVING
TROUBLE?
ISSUE
Vacuum is not picking
up debris. No suction
or light suction.
Solution
Empty dust cup, clean
filters, and check all openings
for blockages.
ISSUE
Vacuum lifts area rugs.
Solution
Turn off the unit to disengage
the brushroll and restart with
the power slider switch.
ISSUE
Brushroll and/or soft roller
does not spin. The Brushroll
Indicator Light on the floor
nozzle turns red.
Solution
Turn off and unplug the
vacuum immediately.
Remove any blockages, then
reconnect and turn vacuum
back on. If Brushroll Indicator
Light on the floor nozzle
is green, the blockage has
been successfully cleared.
If the light is still red, please
contact customer service
at 1-800-798-7398.
Brushroll garage for easy access to your brushroll.
Push the release buttons and the brushroll garage door will pop up.
Lift out the brushroll to easily remove any string, hair, or debris that may
be wrapped around it by using the onboard hair-removal tool.
One-touch button for easy access to soft roller.
Slide the soft roller access button up to remove the soft roller. Use the onboard
hair-removal tool to clean off any string, carpet fibers, or hair that may be wrapped
around the soft roller. Remove any debris from roller housing.
TIP:
Wash filters every
month to keep
the suction strong.
Rinse filters and allow to air-dry
completely. Tap loose dirt
from foam filters as needed
between washes.
OR
OR
Wand
Release
FLOOR CLEANING
ABOVE-FLOOR CLEANING
VERSATILE FLOOR-TO-CEILING CLEANING
MAINTENANCE
STORAGE
Empty
Dust Cup
Release
NOTE:
For deep cleaning per
ASTM F 608 (embedded
dirt in carpet) please use
on Setting II, high pile
carpet mode.
Setting II
Deep cleans
carpets by
removing
embedded dirt.
Both brushrolls
spin faster, working
together to pick
up debris below
the surface of
your carpets.
Setting I
Gentle on bare
floors and delicate
area rugs.
The brushroll and the
soft roller both spin
together slowly to
clean bare floors and
delicate area rugs.
The soft roller traps
fine dust and large
particles, while the
brushroll directs
that debris to the
suction channel.
