Nozzle
Release
Nozzle
Release
3
4
4
5
ASSEMBLY
1
Insert the tube into the floor nozzle connector.
2
Insert the handheld portion into the top of the tube.
FLOOR
CLEANING
This vacuum has a 2-speed POWER slider switch, optimised for bare floor, delicate area rug and carpet cleaning.
3
Plug the unit into an outlet. Slide the POWER switch to the first position to clean bare floor surfaces and delicate area rugs. The brush roll will spin slowly to help
with debris pick-up.
4
Slide the POWER switch to the second position to clean carpets. The brush roll will spin faster to help pick up debris below the surface.
NOTE:
When vacuuming fine dust, e.g. sawdust, sand, flour, talcum powder electrostatic charges build up naturally. Under certain conditions these charges will be
released. To avoid the unpleasant effects of these discharges, a metal strip has been incorporated into the top of the handle. Please make sure that you keep your hand in
constant contact with this metal strip during vacuuming.
ABOVE FLOOR
CLEANING
This vacuum has the reach to clean up above floors or in tight spaces by using the tube. It also has the convenience of a handheld vacuum when using it
without the tube.
1
Press the coloured button on the floor nozzle and pull to disconnect it from the end of the tube. Attach desired cleaning accessory.
2
Press the coloured button on the top of the tube and pull to disconnect it from the handheld portion. Attach desired cleaning accessory.
NOTE:
Select cleaning accessories are included with this model.
A U S T: 18 0 0 8 9 0 8 4 0
N Z : 0 8 0 0 0 0 2 9 9 9
2
CLICK
CLICK
1
1
2
Содержание HV300NZ
Страница 1: ...OWNER S GUIDE HV300NZ...
