TOLL FREE: 1-800-798-7398
5
www.sharkclean.com
English
1
To extend the power cord, pull
it from the rear of the vacuum
to the desired length. (
Fig. 2
) A
yellow mark on the power cord
shows the ideal cable length.
CAUTION
: Do not pull the
power cord beyond the red
mark on the power cord as this
will damage the cord.
2
To retract the power cord, press
the cord rewind button. (
Fig. 3
)
If the cord does not fully retract,
pull it out a little and then press
the rewind button again.
WARNING
: Always hold the
plug and
DO NOT
allow to
whip when rewinding
3
Plug the vacuum into an
electrical wall outlet.
4
Press the On/Off Button to the
“On” position to begin.
(
Fig. 4
)
5
Press the On/Off Button to the
“Off” position when finished
using the vacuum.
6
To store the canister vacuum,
insert the clip that is on the
back of the floor brush into the
slot on the back of the vacuum.
(
Fig. 5
)
Manual Suction Control
The Shark
®
Quick Clean Canister
vacuum includes a manual variable
suction control on the handle of
the hose. The suction power can
be adjusted by moving the slide
regulator to the desired position.
(
Fig. 6
) By opening the slide
regulator, the suction will be
reduced for vacuuming upholstery
and draperies. With the slide
regulator closed, you get maximum
suction for vacuuming carpets.
Using the Vacuum
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
EP780C_42_IB_ENG_FRE_110418_1.indd 5
11-04-19 9:15 AM
