Fig. 1
Sleeve nut
Bolt
PRECAUTIONARY MEASURES
IMPORTANT:
If the suction opening in the unit or the hose is BLOCKED, switch off
the vacuum cleaner and remove the blocking substance before you
start the unit again.
1.
Do not
operate the vacuum cleaner
too close to heaters, radiators or
cigarette butts.
2. Before inserting the power plug into
the wall outlet, make sure that your
hands are dry.
4. When pulling out the power plug
from the wall outlet, pull the plug not
the power cord.
3. Before you start vacuuming, make
sure to remove large or sharp objects
that might damage the dust cup
debris screen.
5.
Do not
pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
6.
Do not
use without ALL filters in
place.
3
OPERATING INSTRUCTIONS
WARNING:
Always remove the power
plug from the wall outlet before
assembling or removing accessories.
ATTACHING THE FLOOR BRUSH
TO THE MAIN UNIT
• Insert the floor brush into its location at
the bottom of the main unit, in the
direction of the arrow. (Fig. 2)
• Make sure that the floor brush is firmly
inserted into the floor brush socket.
• Insert the inlet hose into the floor brush
hose connector that is on the floor
brush. (Fig. 3)
• To remove the floor brush from the
main unit, press on the floor brush
release button and pull the floor brush
out.
ATTACHING THE HOSE TO THE
MAIN UNIT
• Hold the end of the removable hose
handle and insert it into the hose
connector. (Fig. 3)
4
Fig. 2
Floor Brush
Hose Connector
Floor Brush
Hose Connector
Hose
Connector
Fig. 3
Inlet
Hose
Inserting the Handle Into the Main
Unit
• Insert the handle into the hole on the
top of the unit. Make sure that the slot
in the handle fits correctly into the
opening. (Fig. 1)
• Insert the sleeve nut into the unit first.
Then holding the sleeve nut with your
thumb, insert the bolt. Using a flat
screw driver, secure the bolt to the
sleeve nut. (Fig. 1)
• To remove the
handle, you have
to remove the
bolt and the
sleeve nut.
