OPERATING INSTRUCTIONS cont.
PRECAUTIONARY MEASURES
Fig. 6
CAUTION
:
The suction hole must
be open, free of any obstructions at
all times. Otherwise, the motor will
overheat and could become damaged.
PLEASE NOTE
: The white pleated
filter material in the HEPA Dust Cup
Filter will discolor over time -This is
NORMAL and will NOT affect the
performance of the filter. If the HEPA
Dust Cup Filter
is properly
"TapCleaned”
after each use
and suction
does not return
to 100%, then
we suggest that
the HEPA filter
be “TapCleaned”
vigorously until no
more dust can be removed, then
rinsed under the faucet and allowed to
air dry for 24 hours before refitting into
the vacuum. (Fig. A) Wash once a
month or when suction appears
reduced.
5. Vigorously “TapClean”
the HEPA Dust Cup
Filter on a hard
surface until no more
dust is observed
falling out from
between the pleats of
the filter. (Fig. 6)
Fig. 7
Debris
Screen
6. “TapClean” the Debris
Screen or rinse under
a faucet until clean.
(Fig. 7) Remember
that the Debris Screen
must be completely
air dried for 24 hours
before reinstalling
in the vacuum.
7. Replace the Debris Screen on the
HEPA Dust Cup Filter and reinstall
filter assembly in the vacuum. (not
shown)
Fig. A
Wash once a
month or when
suction
appears
reduced.
Warning:
Allow 24
hours for drying before
replacing in unit.
• Rinse the exhaust filters in lukewarm
water and air dry the filters completely.
Do not use a washing machine to rinse
the filters. Do not use a hair dryer to
dry them. Air dry only for 24 hours.
Never operate the vacuum
without the exhaust filters in
place.
• When the filters are dry,
replace them into the
exhaust filter covers and
replace the filter covers on
the unit.
• A severely soiled or clogged
filter should be thoroughly washed with
fresh tepid water. A mild detergent
can be used if required.
Please Note:
The HEPA Dust Cup Filter
is washable. It should, however, be
replaced every six (6) months to ensure
peak performance of your vacuum.
The Exhaust filters are washable. They
should however be replaced every six (6)
months to ensure peak performance of
your vacuum.
Important:
Make sure that
ALL
filters are
completely dry before re-installing back in
the hand vacuum.
Important:
All filters should be checked
regularly for signs of damage, preferably
after each cleaning task. The filters must
be replaced immediately if they become
damaged. Always disconnect the vacuum
from the electrical outlet when checking
the filters.
Exhaust
Filter
Cover
Exhaust
Filter Cover
Exhaust
Filter
Exhaus
t Filter
Changing & Cleaning the Exhaust
Filters
The exhaust filters are washable filters
but should be replaced every three (3)
months depending on usage.
• Remove the exhaust filter covers from
the sides of the unit. (See illustration
below.)
Important
:
If the suction opening in the unit or the hose becomes blocked, switch off
the vacuum cleaner and remove the blocking substance before you start
the unit again.
1.
Do not operate the vacuum
cleaner to close too heaters,
or radiators.
5.
When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
6.
Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
2.
Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
7.
Do not use without HEPA dust cup
filter in place.
8.
Before you start vacuuming,
make sure to remove large or
sharp objects that might
damage the vacuum.
3.
Do not vacuum any liquids.
4.
Keep hair, loose clothing, fingers,
feet and all parts of body away from
openings.
3
6
Содержание EP045
Страница 2: ......
