16
AUS sharkclean .com . au NZ sharkclean .co. nz
3
Press top dust cup
empty latch to access
dust screen and
remove built-up debris.
CLEANING THE FILTERS
1
Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters,
and rinse them with
water only. Tap loose
dirt off filters between
cleanings as needed.
2
Post-Motor (HEPA):
To access the HEPA
filter, reach under the
filter cover, and press
the Filter Access tab.
Lift off the cover and
remove the HEPA filter.
To remove the black
foam pre-HEPA filter,
simply pull it out from
the frame. Rinse filters
in water only and
allow them to air-dry
completely before
reinstalling. Before
reinserting the pre-
HEPA filter, make sure
the edges of the foam
are tucked into the
frame.
STEP 3
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME
Filter Access
PRE-
HEPA
PRE-MOTOR
POST-MOTOR
NOTE:
To remove the pre-HEPA foam
filter, pull out from frame.