Shark CD-2323 Скачать руководство пользователя страница 4

cd 97-726  •  rev. 7/07

OPERA

TOR’S MANU

AL

  

PRESSURE 

W

ASHER 

 

4

INTRodUCTIoN & IMpoRTaNT SafeTy INfoRMaTIoN

thank you for purchasing this pressure Washer.
We  reserve  the  right  to  make  changes  at  any  time 
without incurring any obligation.

owner/User Responsibility:

the owner and/or user must have an understanding of 
the manufacturer’s operating instructions and warnings 
before using this pressure washer. Warning information 
should be emphasized and understood. if the operator 
is not fluent in english, the manufacturer’s instructions 
and  warnings  shall  be  read  to  and  discussed  with 
the operator in the operator’s native language by the 
purchaser/owner, making sure that the operator com-
prehends its contents.
owner and/or user must study and maintain for future 
reference the manufacturers’ instructions.
the  operator  must  know  how  to  stop  the  machine 
quickly  and  understand  the  operation  of  all  controls. 
never  permit  anyone  to  operate  the  engine  without 
proper instructions.

This manual should be considered a permanent 

part of the machine and should remain with it if 
machine is resold.
When ordering parts, please specify model and 
serial number. Use only identical replacement 
parts.
This machine is to be used only by trained op-
erators.

IMpoRTaNT SafeTy 

INfoRMaTIoN

Read opeRaToR’S 

MaNUal ThoRoUghly 

pRIoR To USe.

WARNING: To reduce the risk of 

injury,  read  operating  instruc-
tions carefully before using.

  1.  read  the  owner's  manual 

thoroughly.  Failure  to  follow 
instructions could cause mal-
function  of  the  machine  and 
result in death, serious bodily 
injury and/or property damage.

 

  2.  Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

  .  stay alert — watch what you are doing.
  4.  all  installations  must  comply  with  local  codes. 

contact your electrician, plumber, utility company 
or the selling distributor for specific details.

WaRNINg

RISk of 

aSphyxIaTIoN:  USe 

ThIS pRodUCT oNly 

IN a Well 

veNTIlaTed aRea.

WARNING: Risk of asphyxiation. 

Use  this  product  only  in  a  well 
ventilated area.

   5.  avoid  installing  machines  in 

small  areas  or  near  exhaust 
fans.  exhaust  contains  poi-
sonous  carbon  monoxide 
gas; exposure may cause loss 
of  consciousness  and  may 
lead to death. it also contains

    chemicals  known,  in  certain  quantities,  to  cause 

cancer, birth defects or other reproductive harm.

WaRNINg

RISk of fIRe.  

do NoT add fUel 

WheN opeRaTINg 

MaChINe.

WARNING:  Risk  of  fire.  Do  not 
add  fuel  when  the  product  is 
operating.
WARNING: Risk of explosion —  
do not spray flammable liquids.

  6.  d o   n o t   p l a c e   m a c h i n e 

n e a r   f l a m m a b l e   o b -
jects  as  the  engine  is  hot.

  7.   allow engine to cool for 1-2 minutes before refu-

eling. if any fuel is spilled, make sure the area is 
dry  before  testing  the  spark  plug  or  starting  the 
engine. (Fire and/or explosion may occur if this is 
not done.)

    gasoline engines on mobile or portable equipment 

shall be refueled:

    a.  outdoors;
    b.  with the engine on the equipment stopped;
    c.  with  no  source  of  ignition  within  10  feet  of  

 

the dispensing point; and

    d.  with an allowance made for expansion of the  

 

fuel should the equipment be exposed to a  

 

higher ambient temperature.

    in an overfilling situation, additional precautions are 

necessary to ensure that the situation is handled 
in a safe manner.

WARNING:  Risk  of  injury.  Disconnect  battery 
ground terminal before servicing.

  8.  transport/repair with fuel tank emptY or with fuel 

shut-off valve oFF. 

WaRNINg

keep WaTeR 

SpRay aWay fRoM 

eleCTRICal WIRINg.

WARNING: Keep wand, hose, and 

water  spray  away  from  electric 
wiring or fatal electric shock may 
result.

9.  do not spray water on or near  
 

electrical components. 

Содержание CD-2323

























Отзывы: