11
12
sharkclean .com
USING YOUR VACUUM
IN UPRIGHT MODE
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are spinning
and working as they should.
Solid Red
There is a jam in the brushroll
area. Turn off your vacuum
and remove any blockages.
Flashing Red*
The motorized floor nozzle
is overheating. Turn off your
vacuum and wait for it to
cool down. After vacuum
has cooled, move surface
selector switch to Thick
Carpet/Area Rug mode, then
press Power button to turn
vacuum back on.
No Light
The brushrolls are not spinning
because the vacuum is off.
1
Plug power cord into outlet. Place foot on floor nozzle
and tilt handle back.
3
Choose the appropriate setting.
Thick Carpet & Area Rug Cleaning
Set surface selector to Thick Carpet/
Area Rug.
Carpet & Low Pile Cleaning
Set surface selector to Carpet/Low Pile to
increase the speed of your brushrolls and
to help remove stuck-on dust and debris.
Hard Floor Cleaning
Set surface selector to Hard Floor.
NOTE:
For deep cleaning per ASTM F 608 (embedded
dirt in carpets) please set to Carpet/Low Pile.
2
Press power button to turn on vacuum.
Please note the brushrolls will not spin
unless the wand is reclined.
STEP 1
STEP 3
STEP 2
* See Troubleshooting section for
further instructions.
